Create an Account - Increase your productivity, customize your experience, and engage in information you care about.
The POTABLE and NON-POTABLE water at the Gwynne Truck Fill is now operational but due to Alberta Environment and Parks regulations, an Air Gap MUST be maintained between the hose and tank being filled. This Air Gap will prevent cross contamination from the hoses as well as prevent a back siphon condition. The county is recommending truck fill customers build an ABS or PVC pipe extension piece 6” in diameter or greater. The length of the extension piece will vary from customer to customer depending on different tank height set ups. The flexible blue and green truck fill hoses are set to approximately 10’ above ground level. As shown in the photo the extension pieces can be supported with threaded rod. We will be moving the overhead hoses more east towards the center of the driveway to help different pickup truck and trailer units position themselves underneath the hoses. Please contact the Utilities Foreman at 780-387-6317 if you have any questions.
The Gwynne truck fill is equipped with a certified back flow preventer device to prevent a back siphon condition. Alberta Health Services and Alberta Environment and Parks has been concerned with the risk of cross contamination from the previous long length of the hoses as there is potential for them to be dipped into customers tanks of unknown substances. As we cannot guarantee the cleanliness of the hoses it poses a risk to public health. Our Mandate is to provide safe clean drinking water. We have been advised we need to provide an air gap between the bottom of the hose and the tank being filled to reduce the risk of cross contamination.Again, we apologize for the inconvenience this has caused.